SCI W/B EPOXY SATIN FINISH 195-80 Series

Specialty Coatings 195-80 Series

$65.95

One of our best selling garage floor epoxies, 195-80 Series is a two-component water based epoxy formulated to coat interior concrete with a tough, chemical and abrasion resistant film. This satin gloss finish provides superior resistance to abrasion, marring, scuffing, forklifts and chemicals including oil, grease, many solvents and moderate acids and alkalias. Ideal for use in factories, warehouses, parking decks and other applications where heavy-duty coating is required.

Ideal for use as a basecoat for color chips when topcoated with a clear urethane or epoxy.

A two-component satin finish water based epoxy coating that exhibits excellent characteristics that rival solvent based products.  This product can be used as a primer/finish or as a primer under solvent base epoxies.  

Ideal for use as a basecoat for color chips when topcoated with a clear urethane or epoxy.

  • Low odor
  • Good chemical resistance
  • Excellent abrasion resistance
  • Excellent substrate penetration

Packaged in 1gal, 2gal. and 5gal kits.  Activator included.

RECOMMENDED FOR:

Ideal for garage floors, locker rooms, cafeterias, hospitals and schools. Recommended for priming or coating concrete, wood or masonry.  This product can withstand exposure to many common solvents and chemicals. 

 

SOLIDS BY VOLUME:

Mixed = 41% (colors); 36% (clear); (+, - 2%)

VOLATILE ORGANIC CONTENT:

Colors = 1.01 pounds per gallon (mixed) (regulatory VOC = 175g/l)

Clear = 1.0 pounds per gallon (mixed) (regulatory VOC = 230g/l)

STANDARD COLORS:

Off white, light gray, medium gray, tile red, beige, and amber clear.  NOTE: The clear is not water clear and is not suitable for topcoating over previously color coated floors.  The clear is suitable as a primer or concrete sealer only.

RECOMMENDED FILM THICKNESS:

5 -7 mils per coat wet thickness (yields 2-3 mils dry)

COVERAGE PER GALLON:

229 to 320 square feet @ 5-7 mils wet thickness

PACKAGING INFORMATION                              

1 gallon, 2 gallon and 5 gallon kits (volume approx.)

MIX RATIO:

Colors= 8.55# part A (.80 gallons, approximate) to 1.75# part B (.20 gallons, approximate)

Clear= 6.55# part A (.80 gallons, approximate) to 1.90# part B (.20 gallons, approximate)

SHELF LIFE:

1 year in unopened containers

FINISH CHARACTERISTICS:

Satin gloss (40-80 at 60 degrees @ glossmeter)

DOT CLASSIFICATIONS:

Not regulated

CURE SCHEDULE: (70F)

pot life – 1 gallon volume …………………..1.0 - 1.5 hours

tack free (dry to touch)………………………..      5-8 hours

recoat or topcoat.....…………………………       7-10 hours

light foot traffic...……………………………...    16-24 hours

full cure (heavy traffic)... ………………………       2-7 days