High Performance Polyester/Aliphatic Urethane

Specialty Coatings 195-4 Series

$123.60

195-4 Series is a two component polyester/aliphatic polyurethane coating that has excellent adhesion to concrete providing a hard wearing, durable, high gloss, easy cleaning floor system.  It is chemical resistant, flexible and exhibits outstanding weathering and UV stability.  

This coating can provide a slip resistant surface with the addition of our non slip additive 195-SR60. When added, the heat -treated corundum form crystilline tabular alumina,  produces a slip-resistant coating that is extremely wear resistant yet easily cleaned.  Ideal for service centers, dealerships, aircraft hangers, garage floors and similar areas.

Available in a wide range of colors.

PRODUCT DESCRIPTION:

A two-component polyester/aliphatic polyurethane coating that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability. This product meets the VOC requirements for the newly enacted VOC laws of New York, Pennsylvania, New Jersey, and other states as an industrial maintenance coating.

 RECOMMENDED FOR: Recommended for auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, exterior tanks, indoor or outdoor service and chemical exposures areas.

 

SOLIDS BY WEIGHT:

Mixed= 73% (colors); 64% (clear) (+/- 2%)

SOLIDS BY VOLUME:

Mixed= 70% (colors); 60% (clear) (+/- 2%)

VOLATILE ORGANIC CONTENT:

VOC content is less than 335 g/l (mixed)

STANDARD COLORS:

white, off white, light gray, medium gray, tile red, beige, and clear.

RECOMMENDED FILM THICKNESS:

3-5 mils per coat wet thickness (yields 2-3 mils dry)

COVERAGE PER GALLON:

320 to 500 square feet @ 3-5 mils wet thickness

PACKAGING INFORMATION:

3 gallon and 15 gallon kits. 3 gal kit = 2 gallons part A (weight varies by color) and 1 gallon part B (8.5#) (weights and volumes approximate)

MIX RATIO:

2 parts A to 1 part B by volume (approximate)

SHELF LIFE:

1 year in unopened containers

FINISH CHARACTERISTICS:

semi-gloss (>40 at 60 degrees @ glossmeter)

CURE SCHEDULE:  (70°F)

Potlife(1-1/2 gallon volume)…………...…...2-4 hours

Tack free (drytotouch)…… ………………   3-5 hours

recoat or topcoat..... ……..…...................    5-9 hours

light foot traffic...……………… ……….... 14-24 hours

full cure (heavy traffic)... …………...…..…    3-5 days

APPLICATION TEMPERATURE:

45-90 degrees F. with relative humidity below 90%

PRIMER:

SCI water base or solvent based epoxies

 

Refer to TDS for additional information: