Industrial Coatings

See also:

• Industrial Coatings
• Floor Coatings

Featured industrial coatings from PPG

Pitt-Guard® Rapid-Coat Direct-To-Rust Epoxy Mastic 95-245 Series

Pitt-Guard Rapid-Coat DTR offers barrier-coat corrosion protection in a tintable, low-temperature cure epoxy. Pitt-Guard Rapid-Coat is a surface-tolerant epoxy, designed for use on minimally prepared surfaces and over tightly adhering rust in corrosive and non-corrosive environments. It is ideal for areas that require a fast-drying epoxy.

Pitt-Guard® Rapid-Coat Direct-To-Rust Epoxy Mastic 95-245 Series Tech Data Sheet (145 KB PDF)

Aquapon® 35 Polyamide-Epoxy Gloss 95-1 Series

Aquapon 35 is ideal for surfaces that require a chemical and abrasion resistant coating with superior hardness. It is designed for use in heavy industrial and commercial applications that are subject to splash, spills and strong chemical cleaners. A full range of colors are available using the PPG Performacolor® tinting system.

Aquapon® 35 Polyamide-Epoxy Gloss 95-1 Series Tech Data Sheet (69 KB PDF)

Pitthane® Ultra Gloss Urethane Enamels 95-812 Series

Pitthane Ultra offers superior gloss and color retention over standard urethane finishes. It is recommended for use as a finish coat in interior and exterior coating systems where a high gloss, wet look finish is desired. The excellent adhesion and abrasion characteristics of Pitthane Ultra make it the outstanding choice in industrial and commercial applications where long-term protection and aesthetics are critical.

Pitthane® Ultra Gloss Urethane Enamels 95-812 Series Tech Data Sheet (145 KB PDF)

Durethane® DTM Mastic – 95-3300 Series

Durethane DTM is a direct-to-metal urethane mastic coating ideal for use in both interior and exterior application. Chemically resistant and extremely durable, Durethane DTM is formulated to provide excellent corrosion resistance and is recommended for use on structural steel, aluminum, tanks, chemical environments and various manufacturing and production facilities. This easy to apply by brush, roller or spray coating offers excellent sag resistance and infinite color capability with our PerformaColor color system. Packaged in one gallon and five gallon kits, Durethane DTM meets the need for every size job.

Durethane® DTM Mastic – 95-3300 SeriesTech Data Sheet (30 KB PDF)

Featured industrial coatings from Amercoat

Amercoat 370 Fast-dry Multi-Purpose Epoxy

Amercoat 370 forms an excellent corrosion barrier and is suitable for most industrial and marine new construction, repair, and field maintenance applications.  The fast curing properties of Amercoat 370 make it especially beneficial as a shop-applied coating where fast-drying and handling of coated parts are required. Amercoat 370 is user-friendly and can be applied by a variety of spray application methods.

Amercoat 370 Fast-dry Multi-Purpose Epoxy Tech Data Sheet (118 KB PDF)

Amerlock 400  High Solids Epoxy Mastic Coating

Two-pack, high solids, high performance maintenance coating for new or old steel.  Ideally suited for the protection of steel structures in industrial facilities, bridges, tank exteriors, marine weathering, offshore, oil tanks, piping, roofs, water towers.

• Surface tolerant self priming top coat
• Self-priming topcoat over most existing coatings
• Compatible with prepared damp surfaces
• Compatible with adherent rust remaining on prepared surfaces
• Can be overcoated with a wide range of topcoats
• Resists high humidity and moisture
• Good chemical resistance to splash/spillage and fumes
• Suitable for use in drinking water (AS 4020 and NSF Standard 61 CLD23): selected colors
• Approved to APAS 2973, 2976 and 2977

Amerlock 400  High Solids Epoxy Mastic Coating Tech Data Sheet (129 KB PDF)

PSX 700 Polysiloxane Topcoat

PSX 700 is a special epoxy siloxane coating that is self-priming or can be used with a suitable primer. It offers a combination of outstanding corrosion resistance and unparalleled long-term gloss and color retention in one product.  PSX® 700 offers a longer service life than the traditional epoxy/aliphatic polyurethane system it replaces   But when combined with an inorganic zinc primer (suchas Ameron’s Dimetcote Series inorganic zinc), the 2-coat system significantly outlasts the best 3-coat zinc silicate, epoxy, polyurethane system.   Here are just a few of the performance benefits offered by PSX® 700:

• Gloss and color retention surpasses that offered by an aliphatic polyurethane
• Corrosion and chemical resistances exceed those provided by an epoxy coating
• Adhesive strength of 2700 psi (on steel, using ASTM D4541) is more than double the 500-1000 psi offered by conventional epoxy coatings
• Abrasion resistance is greater than or equal to a flexible aliphatic polyurethane and far superior to an ordinary epoxy
• PSX® 700 is highly resistant to stains, graffiti and dirt accumulation

PSX 700 Polysiloxane Topcoat Tech Data Sheet (167 KB PDF)